Tali Posted January 7, 2020 Share Posted January 7, 2020 В анонсах Eduard на 2020 год присутствует Bf 108 Taifun в масштабе 1/32. pentagonschik and ВПК 2 Quote Link to comment Share on other sites More sharing options...
Tali Posted January 8, 2020 Author Share Posted January 8, 2020 Небольшое уточнение - это будет не совсем Эдиковская разработка. (...) You might be thinking up to know, ‘nothing really special‘. No big surprises. So, here’s something with the ability to change your thinking. In May, we will be releasing a 1:32nd scale ProfiPACK Bf 108. It is not from our original moulds, these hail from a company named Foke, and they normally are seriously involved with the manufacture of industrial robots. This was originally a bit of a side venture for the firm, and they came to the conclusion that it wasn’t their cup of tea, and so we were able to by the Tajfun from them. The good news is that we can offer this kit in 1:32nd scale, but the bad news is that there is not much in the way that would point towards more 32nd scale releases from our company. That is, unless the Bf 108 INFO Eduard - January 2020 eduard 5 suggests a big market for such kits, or someone doesn’t offer to sell us such moulds in the future. And neither is out of the question. (...) heliofly and pentagonschik 2 Quote Link to comment Share on other sites More sharing options...
heliofly Posted January 9, 2020 Share Posted January 9, 2020 Интересно, как контора,занимающаяся разработкой промышленных роботов,решилась на такой шаг?. И выбор прототипа нестандартный...Надеюсь,что Эдуард ,разработает классную декаль,доукомплектует вкусняшками и получится модель на уровне их Спитфайров и Фокке-Вульфов Quote Link to comment Share on other sites More sharing options...
Tali Posted April 29, 2020 Author Share Posted April 29, 2020 palanbor, pentagonschik and Андрій Бутко 1 1 1 Quote Link to comment Share on other sites More sharing options...
flomaster Posted April 29, 2020 Share Posted April 29, 2020 Чето совсем тоскливо, даже для 48-го. Реально на любителя... Gavrosh 1 Quote Link to comment Share on other sites More sharing options...
heliofly Posted April 29, 2020 Share Posted April 29, 2020 А я бы под испанца взял...Если добавят смолу и травление,должно нормально смотреться .Добавили бы деталировку на движок и сиденья.Может ,Эдуард подсуетится? flomaster 1 Quote Link to comment Share on other sites More sharing options...
flomaster Posted April 29, 2020 Share Posted April 29, 2020 28 минут назад, heliofly сказал: Если добавят смолу и травление Травленка есть вроде. Может и смолы насыпят кроме винта... Но как ни крути это не уровень 2020 года, особенно для "взрослого" масштаба ((( Quote Link to comment Share on other sites More sharing options...
Tali Posted April 29, 2020 Author Share Posted April 29, 2020 Блин, ну вам же написали выше - это разработка фирмы, которая занимается индустриальными роботами и хотела попробовать себя в моделизме. ХЗ вообще когда эта модель была разработана – может 10 лет назад. Парни решили, что это не их бизнес и продали что было Эдику. Quote Link to comment Share on other sites More sharing options...
heliofly Posted April 29, 2020 Share Posted April 29, 2020 А на "Запорожец" не похож -и это радует,посмотрим на цену .Реально большого испанца хочу. Даже не в немецкой шкурке ,а в румынской,болгарской,испанской или венгерской должен смотреться Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.