Tali Posted October 17, 2015 Share Posted October 17, 2015 (edited) Hypersonic Models делает SR-71 в 1/48!!!Модель будет из пластика - не смола!Подрезал на бритмоделлере со ссылкой на Facebook. Также у компании в планах имеется U-2A/C в 1/48. Напомню, что SR-71 в 1/48 также есть в планах компании Tanmodel.А в каталоге Hobby Boss есть U-2R в 1/48. I’m working on an all-new, injection moulded (plastic, not resin!) SR-71 kit in 1:48. Work started in early 2014 and includes a mountain of reference material, several measuring sessions at Duxford’s Sled and most recently a 3D scan of the cockpit area (see my profile pic, that’s a mesh render of the scan). I realise that this is quite a lot to chew for me in particular as this is my first whole kit design and I’m working on my own, besides running Hypersonic Models and a “normal” job. I also realise that I run the risk of being brushed aside and labelled a fantasist or delusional, but I’m VERY (V.E.R.Y.) determined with this and I’m slowly starting to see the fruits of my labour (i.e. the CAD is starting to take shape). I have a few people to give me extremely valuable advice and support (in terms of both research and design) and I do know that this whole undertaking is extremely expensive so I might not do this completely on my own. It’s still a long journey ahead, but I will get there. Any comments, advice, support and input are of course more than welcome!And the story doesn’t stop there – I have a U-2A/C kit planned (most likely a multi-option kit). Extensive research and measuring has already taken place at Duxford (but is still continuing in other parts of the world) and as soon as Telford is over I’ll start drawing. I do have other kits planned (all 1:48), but don’t want to reveal anything else just yet.The unfortunate episode with the T-33 has of course thrown me back a few weeks and has put a sizable dent into my budget (the cost of the 3D scan). Had I heard even the smallest rumour that GWH were making one I would have concentrated all efforts on the SR-71... But that’s hopefully just a small cough at the beginning of this new chapter. Onwards and upwards.Cheers! Edited October 17, 2015 by Tali Quote Link to comment Share on other sites More sharing options...
AnKor Posted October 19, 2015 Share Posted October 19, 2015 Вот так новость! Сколько ж будет стоить и можно ли взять иппотеку? Придется Тестороиталовский Блэк Бёрд продавать. Quote Link to comment Share on other sites More sharing options...
Tali Posted October 19, 2015 Author Share Posted October 19, 2015 Северскому продай )Он без него спать не может второй год уже ))P.S. но я бы с продажей не торопился... мало ли кто чего обещал. Пока даже 3D-модель не показали. Отливки - и подавно... Seversky 1 Quote Link to comment Share on other sites More sharing options...
AnKor Posted October 20, 2015 Share Posted October 20, 2015 Спасибо за совет, будем подождать. он у меня с Тру детоловским кокпитом, сейчас отдал на время модель одной нашей хорошей фирме, что бы они на него сделали различные допнаборы, а там глядишь может и передумаю. Quote Link to comment Share on other sites More sharing options...
Tali Posted October 20, 2015 Author Share Posted October 20, 2015 Ой, а можно меня в курсе держать по поводу допнаборов??У меня их два в 48-м - SR-71 и YF-12... Кокпит и колеса смоляные я успел купить, а вот с соплами от Каттинг Эджа пролетел ( Quote Link to comment Share on other sites More sharing options...
Tali Posted October 20, 2015 Author Share Posted October 20, 2015 P.S. На него бы набор сеток травленых сделать... /мечтательно/ Quote Link to comment Share on other sites More sharing options...
Genry Posted October 20, 2015 Share Posted October 20, 2015 P.S. На него бы набор сеток травленых сделать... /мечтательно/Это к Усманову, который AMURiever Quote Link to comment Share on other sites More sharing options...
AnKor Posted October 20, 2015 Share Posted October 20, 2015 Не хочу выдавать без разрешения планы производителя, а это будет Металик Деталс, но как раз сетки они планируют выпустить. По смоляным девайсам увы, промолчу. Quote Link to comment Share on other sites More sharing options...
Tali Posted October 20, 2015 Author Share Posted October 20, 2015 О! Одной заботой меньше... Quote Link to comment Share on other sites More sharing options...
Tali Posted February 28, 2016 Author Share Posted February 28, 2016 Процесс идет, но медленно - нет времени, технические сложности и все такое... Тем не менее: И комментарий автора: I wanted to give you a little sneak peak into the ongoing CAD work at Hypersonic Models. My SR-71 announcement last year wasn't all talk, I am actually working on it. Progress is slow as I only have a few hours spare each week, but progress IS being made. In fact I have passed a major shape difficulty and that is the outer wing with its characteristic leading edge dip and the fillet into the engine nacelle. Some fine tuning still needs to be made, but the shape is there and it looks good to me. Note that the exhaust nozzle petals are in the "closed" position in the pictures, so that may look a little unusual for a Blackbird at rest. AnKor 1 Quote Link to comment Share on other sites More sharing options...
AnKor Posted February 29, 2016 Share Posted February 29, 2016 Какой бы он там не получился, но чувствую денег он будет стоить ого го, что не потяну. И тогда Тесторс, моё всё. Quote Link to comment Share on other sites More sharing options...
Tali Posted February 29, 2016 Author Share Posted February 29, 2016 Ну там вообще все странно - такое ощущение, что это театр одного актера, которые "играет" в свободное от основной работы время. Quote Link to comment Share on other sites More sharing options...
AnKor Posted February 29, 2016 Share Posted February 29, 2016 Ну не они,так Танмодел забабахает, а цены у них, судя по Тандерфлэшу далеко не детские. Хотя всё равно появление новой модели, это хорошо. Он Су-33 рисовала одна контора, а выплыл у Кинетика. Поглядим. Quote Link to comment Share on other sites More sharing options...
Tali Posted February 29, 2016 Author Share Posted February 29, 2016 Ну я вот тоже думал, что чуваки, возможно, хочет нарисовать 3D и продать кому-то. Хотя, модель, в силу размеров, вряд ли будет ходовая... Quote Link to comment Share on other sites More sharing options...
AnKor Posted February 29, 2016 Share Posted February 29, 2016 Ну кто то ж покупает продукцию Гонконг Моделса(хотя я бы их назвал Кинг-Конг Моделс:))), SRку тоже будут брать, в 99% на Западе, ну и 0.1% кому если повезёт заработать/накопить у нас. Может дядя для Танмоделса и старается, хотя последние 3Д сканированием угрожали, ХЗ.. Quote Link to comment Share on other sites More sharing options...
Tali Posted June 25, 2018 Author Share Posted June 25, 2018 Еще картинко TomcaT 1 Quote Link to comment Share on other sites More sharing options...
Tali Posted September 13, 2020 Author Share Posted September 13, 2020 Такими темпами к моей пенсии должны выпустить... Андрій Бутко 1 Quote Link to comment Share on other sites More sharing options...
Gavrosh Posted September 13, 2020 Share Posted September 13, 2020 Такими темпами к моей пенсии должны выпустить... - так якраз і буде чим зайнятися на пенсії.Разом з онуками Quote Link to comment Share on other sites More sharing options...
Tali Posted September 13, 2020 Author Share Posted September 13, 2020 На пенсию у меня Валькирия припасена )) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.